Get the Real Deals!
Subscribe to our email alerts for coupons and special bargains!
We value your Privacy. Your info will never be shared with a third party.
|
BEVO Works - Outdoor Home and Garden Store :: Helpful Hints for Solexx Rolls
Helpful Hints for Solexx Rolls
Helpful Hints for Solexx Rolls
Solexx is very strong yet flexible, making it easy to work with. Because it is translucent and diffuses light, it makes an ideal covering for greenhouses, end walls; light panels in Barns... the possibilities are endless. Remember that this product may have a slight imperfections, or blemishes, but they are only cosmetic, and will not affect the quality. Following are a few tips on how to handle this revolutionary plastic in rolls:
1. If the plastic on the role is too curved for easy handling, you may try to straighten it. Cut off the size of material that you need to apply, and lay it out flat in a warm environment. Also, if the role has been in storage for a period of time, it may develop a slight “yellow” tint from the UV inhibitor. Exposure to direct sunlight should quickly clear this up.
2. Apply plastic when the temperature is moderate (for your climate) to compensate for expansion and contraction.
3. We recommend that the framing or trusses that will support your corrugated plastic be placed 16” to 24”apart.
4. We have found that placing your Solexx so that the flutes run perpendicular to the frame provides the maximum amount of strength for your structure. When attaching the screws to plastic framing or wood, we recommend using 1 inch screws with neoprene washer which prevents water from leaking into the flutes. Our 3/4" drill screws are for installing the plastic into the metal framing. We suggest placing the screws about 18” apart on the stringers, and about 9 inches apart on the perimeter. Be careful not to over torque to screws, or you may crush the plastic. The washers should just make a dimple in the plastic.
5. CUTTING: Unlike most types of rigid plastic, Solexx cuts easily with a utility knife or sharp kitchen knife.
6. U-TRIM: on all exposed fluting, we recommend you insert a 1/4" of GE silicone II Clear caulking (# 5000) into flutes, to prevent water intrusion. Then slide U-trim over the end of plastic for a permanent cap. Secure U-trim with small Zip Ties by poking a small hole in plastic with a large paperclip or small nail. Place each zip tie about 1 foot apart. Put caulking in all the holes you created to stop water penetration.
7. Solexx rolls may not be exactly square. Do not use the plastic to square your structure.
8. It is not necessary to cut Solexx when installing over roof peaks or around corners. You can score the plastic using a straightedge and a blunt object such as a Phillips screwdriver (be careful not to cut the plastic), and then fold the plastic along the scored line. The plastic can be scored either in the direction of the flutes or across the flutes.
9. Although Solexx rolls do not have a "building code certification" they have been used for deck coverings, carports covering and wood storage. Some have good results, although we have found that it may not be the most suitable product for these applications.
10. Wipe down selects with soap and water once a year for maximum efficiency of light transmission.
PS please fill out the warranty card and send back to Solexx as soon as possible, to make sure they have an accurate record of your purchase. If you have any questions or concerns regarding these products, please give Solexx a call at once: 800-396-0410
|
|
|
|
Garden Structures